manualshive.com logo in svg

Bay Networks 5391, Manual, Page: 229 / 351

Share
Download
Bay Networks 5391 Manual Download Page 229

A-39

Appendix A    RAC Parameters

Managing Remote Access Concentrators Using Annex Manager

cli_prompt

defines the RAC prompt for all CLI users. This parameter uses formatting codes
consisting of the percent character and a single lowercase letter. You can combine
these codes (e.g.,

%a%c

) using up to 16 codes. In addition, you can enter text

that appears in the prompt as long as your entire entry does not exceed 32
characters. You can enter:

•

%a to display

RAC.

•

%c to display a colon and a space.

•

%d to display the date and time (e.g.,

 Mon Mar 14

13:59:42 1996).

•

%i to display a RAC IP address.

•

%j to display a new line.

•

%l to display the location of the port. If no location is defined,
the port number (e.g.,

port 10

)

 appears.

•

%n to display a RAC name or its IP address.

•

%p to display the port number of a virtual CLI connection
number preceded by

v.

•

%r to display

port

.

•

%s to display a space.

•

%t to display the current time in 24 hour format.

•

%u to display the user name of the port.

Type

RAC

Values

%a, %c, %d, %i, %j. %l, %n, %p, %r, %s, %t, %u

Default

%a%c

Lists

RAC Only, Basic RAC, Virtual CLI

Summary of Contents for 5391
































































































































































































































































































































































Reviews:

No comments