Baumuller BUS 6-T Series, Technical Description And Operations Manual

Page: 107 / 119

Status messages Maintenance
Controller BUS 6 T
101
Baumüller Nürnberg GmbH
5.94017.06
8.2.1 Error messages
Parameter overview
ID no. Name Range
min. ... max.
Unit Standard
value
Display
only
error messages
11 Class 1 Diagnostics
129 Manufacturer Class 1 Diagnostics
99 command "reset Class 1 Diagnostics"
32906 BUS operating error
32907 BUS hardware error
32908 BUS software error
32909 initialisation error of BUS I/O
components
32910 supply operating error
32911 BUG hardware error
32785 error init
32786 error IO
Parameter description
Class 1 Diagnostics
Display of drive interlocking. A Class 1 Diagnostics error situation detected by the drive
leads to:
•
controller inhibit with brake down or pulse inhibit
•
output X3:25 switches to high.
•
setting of error bit.
Delete the error bit (after remedying the fault) with the reset command (ID no. 99).
When switching on again a reset signal is automatically generated.
Bit no. Meaning
0 always 0
1 1: amplifier shutdown temperature exceeded (CI)
2 1: motor shutdown temperature exceeded (CI)
3 1: cooling error shutdown temperature exceeded (CI)
4 1: control voltage error (PI)
5 reserved
6 1: error in electronic commutation system (PI)
7 1: excess current (PI)
8 1: overvoltage (PI)
9 ... 14 reserved
15 1: bit set in Manufacturer Class 1 Diagnostics
PI (pulse inhibit) CI (controller inhibit)