Baumuller BUS 6-T Series, Technical Description And Operations Manual

Page: 116 / 119

Maintenance Disposal
110
Controller BUS 6 T
5.94017.06
Baumüller Nürnberg GmbH
8.3 Disposal
The units consist essentially of the following components and materials
Components Material
Housing, various intermediate plates, fan coil, support plates Steel plate
Heat sinics in power unit Aluminium
Various distance bolts Steel
Various distance bolts, current converter hausing and fan
housing Plastic
Power unit rails Copper
Cable looms PVC insulated calbe leads
Power electronics Metal base plate: Semiconductor chip, plastic
housing, various insulation material.
Cunductor plates, accomodating the complete control and
regulation electronic Base material: EPOXY resin (filled with GRP).
Copperplated on both sides and with
interconnected channels. Various electronic
components such as capacitors, resistors,
relays and semi-conductor components, etc.
The electronic components can, on account of technical demands, contain dangerous materials.
In normal use the various components da not represent a danger to humans or environment.
In the event of fire dangerous materials may be released
The electrical components should not be opened since, for the purpose of internal insulation, (e.g. on
various power semi-conductor) beryllium oxide has been used. The beryllium dust caused by opening
represents a health hazard.
The disposal of the units should conform to the recycling regulations of the country und region in
which they are disposed.