Baumuller BUS 6-T Series, Technical Description And Operations Manual

Page: 65 / 119

Basic settings Parameters
Controller BUS 6 T
59
Baumüller Nürnberg GmbH
5.94017.06
set magnetising current value (I
α αα α
N
)
The magnetising current value is always 0 by synchronous motors.
magnetising current limitation (I
α αα α
G
)
The maximum value of the magnetising current is entered via these parameters.
Sychronous motors: typical value 5 A ... 20 A
Asynchronous motors: 1.2 x set magnetising current value (ID no. 32814)
set active current value (I
ββββ
N
)
I I I
N N N
β α
= − 2 2
active current limitation (I
ββββ
G
)
The active current limitation is entered via this parameter.
Asynchronous motors: 1.2 x set active current value (ID no. 32804)
time constant of actual torque value
This parameter specifies the time constant of the actual torque value.
Typical value 1 ms ... 3 ms.
set apparent current value(I
N
)
apparent current limitation(I
NG
)
This parameter displays the set value and the limitation of the apparent current.
torque controller gain
torque controller integral-action time
These parameters indicate the torque controller's gain and its integral-action time.
flux controller gain
flux controller integral-action time
These parameters specify the flux controller's gain and its integral-action time.