Baumuller BUS 6-T Series, Technical Description And Operations Manual

Page: 105 / 119

Maintenance notes Maintenance
Controller BUS 6 T
99
Baumüller Nürnberg GmbH
5.94017.06
8 M
AINTENANCE
DANGER
This unit carries dangerous voltage and contains dangerous rotating machine parts (ventilators). This
means that death, serious injury or considerable material damage can occur if the safety and warning
notes are not heeded.
Maintenance work on the equipment may only be carried out in a voltage-free state.
Work on the power unit, intermediate circuit and motor terminals may only be undertaken when it is
ascertained that there is neither potential nor voltage (remainder) present.
Wait at least 2 minutes after switching off until the intermediate circuit is completely discharged.
On dismantling safety equipment during commissioning, repair and maintenance, the machine is to
be shut down exactly according to instructions. After completion of commissioning, repair and
maintenance work the safety equipment is to be reinstalled immediately.
After all work on the drive, the machine operator must inspect the machine and document all work in
the machine log chronologically, irrespective of whether it was on the motor, actual value recording or
converter. In cases of non-compliance the operator carries full legal responsibility for the
consequences.
Motors or devices may have components which contain dangerous substances for technical reasons.
Only manufacturer-approved spare parts may be used.
8.1 Maintenance notes
The delivered equipment is maintenance-free.
Prohibition of unauthorised conversion
Unauthorised conversion and alteration of the drive are prohibited for safety reasons. In cases of
doubt, contact the manufacturer.