Baumuller BUS 6-T Series, Technical Description And Operations Manual

Page: 7 / 119

Safety notes
Controller BUS 6 T
1
Baumüller Nürnberg GmbH
5.94017.06
1 S
AFETY NOTES
Foreword
Relatively high leakage to ground occurs in the converter and the motor, i.e. the drive may be
incompatible with residual current protective devices.
In operation, the unit is protected against direct handling in such a way that it is suitable for
installation in enclosed electrical operating areas (pr EN 50178: 1994, sect. 5.2.11.2 und appendix A
5.2.11.2 terminal 7).
A high-voltage test according to pr EN 50178:1994 is to be carried out during routine tests on this unit.
General notes
This manual contains the necessary information for normal operation of the products described
therein. It is intended for technically-qualified personnel who are setially trained and are familiar in
detail with all warnings and maintenance tasks.
The units/systems are finished to the highest standard and are safe and reliable. They can be
installed and operated safely, and function without problem if the following cautionary notes are
heeded.
WARNING
Due to the nature of electrical equipment, certain parts of this unit carry dangerous voltage during
operation.
Serious injury and/or damage to property can result from non-compliance with these safety notes and
warnings.
Only qualified personnel familiar with the safety instructions, and instructions regarding assembly,
maintenance and operation are to work on this unit.