Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Page: 787 / 840

Renumber the table tags
1 In the drawing, zoom in to the area around the cul-de-sac at the end of
the East Street alignment.
2 Click a label tag to select it. Click Labels tab
➤
Modify panel
➤
Renumber
Tags.
3 Click tag C6.
You are notified that tag number 1 already exists. If you press Enter, the
next available curve tag will be applied to this tag. For this exercise, a
duplicate tag is acceptable, because you will continue the renumbering
to resolve duplicates.
4 On the command line, enter C to create a duplicate curve table tag.
The curve table tag now appears as C1.
5 Press Esc.
6 Repeat steps 3 through 5 on the remaining curve table tags, so that the
curve table tags are labeled C1 through C7 clockwise around the
cul-de-sac.
Table tags: original (left) and renumbered (right)
7 Pan to the parcel line and curve table you created in Exercise 2:
Converting Labels to Tags (page 770).
Notice that the table has automatically updated to reflect the new curve
numbering.
Further exploration : Add segment labels to the rest of the parcels along
the East Street alignment, and then convert the labels to table tags.
Exercise 3: Renumbering Table Tags | 775