Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Page: 273 / 840

Add criteria to a table
1 In the Design Criteria File Editor dialog box, on the left-hand side, ensure
that the Local Standards eMax 7% table is selected.
2 On the right-hand side of the dialog box, select the first row in the table.
Click the Speed cell. Select 50 from the list.
3 Click the Radius cell. Enter 54. Press Enter.
4 Repeat steps 2 and 3 to add the following values to the table:
Radius Speed
125 70
235 90
387 110
586 130
TIP To add a row between two existing rows, click . To remove a row,
click .
5 In the Comments field, enter Minimum radii for 7% superelevation at
various design speeds.
Further exploration: Expand the other collections on the left-hand side
of the dialog box. Right-click the various folders and tables and examine
the options that are available.
6 Click Save And Close. When you are notified that the file has unsaved
changes, click Save Changes And Exit.
Further exploration: Use the Alignment Properties dialog box to apply
the new Sample_Local_Criteria.xml design criteria file and Local Standards
eMax 7% table to the alignment in
Align-4b.dwg .
To continue to the next tutorial, go to Applying Superelevation to an
Alignment (page 262).
Exercise 4: Modifying a Design Criteria File | 261