manualshive.com logo in svg

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Share
Download
Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Tutorials Manual Download Page 440

This drawing contains an assembly baseline that does not have any
subassemblies attached to it.

2

If the Tool Palette containing the subassemblies is not visible, click Home

tab

 ➤ 

Palettes panel

 ➤ 

Tool Palettes

 .

3

In the tool palette, right-click the Tool Palettes control bar. Click Civil
Imperial Subassemblies

4

Click the Basic tab.

5

Click 

BasicLane.

6

In the Properties palette, under ADVANCED, set the Side to Right.

7

In the drawing, click the marker point on the assembly baseline.

The right lane subassembly is now attached to the assembly baseline.

8

In the Properties palette, under ADVANCED, set the Side to Left.

9

In the drawing, click the marker point on the assembly baseline.

The left lane subassembly is now attached to the assembly baseline.

10

Press Esc.

11

In Toolspace, on the Prospector tab, select the Subassemblies collection.

In the Toolspace list view, notice that there are two BasicLane
subassemblies. Because this assembly has more than one of the same
subassembly, the sequential naming convention makes it difficult to
distinguish between them. You will correct this in the following steps.

Modify the subassembly name template

1

In Toolspace, on the Settings tab, right-click the Subassembly collection.
Click Edit Feature Settings.

2

In the Edit Feature Settings dialog box, expand Subassembly Name

Templates. In the Create From Macro row, click the Value cell. Click 
.

3

In the Name Template dialog box, in the Name field, highlight the <[Next
Counter]> property.

4

In the Property Fields list, select Subassembly Side. Click Insert.

428 | Chapter 12   Corridor Assembly Tutorials

Summary of Contents for AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands