manualshive.com logo in svg

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Share
Download
Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Tutorials Manual Download Page 686

4

On the Structures tab, click Add Part Family. The Add Part Family dialog
box is displayed.

5

Click your part, and then click OK. An entry is displayed on the Structures
tab for the manhole.

6

Right-click your part and then click Add Part Size. The Part Size Creator
dialog box is displayed. This dialog box lists all of the parameters as
constants right now.

NOTE

Do a quick visual check on the Part Size Creator dialog box to verify

that all values are nonzero. If any of the properties are displayed in the Part
Size Creator dialog box as zero, the part will 

not

 insert into the drawing

properly.

7

Now add a few pipes to your Test Parts List. Exit the Parts List dialog box.
A new Parts List is created.

8

Create a pipe network by layout that contains approximately three
structures and two pipes.

9

Observe how your structures are displayed in plan (2D) views and in 3D
view (Object Viewer).

10

Make an alignment from network parts, and a corresponding profile view.
Note how your structures respond to edits, adjustments, and changes of
pipe inverts.

674 | Chapter 18   Part Builder Tutorials

Summary of Contents for AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands