Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Tutorials Manual Download Page 381

Page: 381 / 840

Click Home tab

➤

Create Design panel

➤

Parcel drop-down

➤

Parcel

Creation Tools

On the Parcel Layout Tools toolbar, click

Specify the following parameters:

As you specify each parameter, notice that a preview graphic is displayed
at the bottom of the Parcel Layout Tools window.

Parcel Sizing

■

Minimum Area: 8000.00

■

Minimum Frontage: 40.0000

■

Use Minimum Frontage At Offset: No

■

Frontage Offset: 20.0000

■

Minimum Width: 40.0000

■

Minimum Depth: 50.0000

■

Use Maximum Depth: Yes

■

Maximum Depth: 200.0000

■

Multiple Solution Preference: Use Shortest Frontage

Automatic Layout

■

Automatic Mode: Off

■

Remainder Distribution: Place Remainder In Last Parcel

Swing one end of a parcel lot line

On the Parcel Layout Tools toolbar, click

Swing Line – Edit.

In the Create Parcels – Layout dialog box, click OK.

You are prompted to select the attached lot line to adjust.

In the drawing, click the lot line that is between parcel 104 and parcel
105.

Select the parcel to adjust by moving the cursor over property 104 and
clicking. Notice that the parcel borders are highlighted.

Exercise 2: Swinging One End of a Parcel Lot Line | 369

Summary of Contents for AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS

Reviews:

Brands by name

Popular brands

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Search results

Summary of Contents for AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS

Reviews:

Brands by name

Popular brands