manualshive.com logo in svg

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Share
Download
Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Tutorials Manual Download Page 763

NOTE

In the previous image, the EP: 0+243.63 and PC: 0+158.39 labels are

shown on opposite sides of the alignment for clarity. You will learn to flip
labels to the opposite side of an alignment in a later exercise.

Add labels to an alignment in a referenced drawing

1

Click Annotate tab

 ➤ 

Labels & Tables panel

 ➤ 

Add Labels

menu

 ➤ 

Alignment

 ➤ 

Add/Edit Station Labels

 . Click the Main Street

alignment, which is the long alignment in the middle of the site.

Because this alignment exists in an externally referenced drawing, the
table in the Alignment Labels dialog box is empty. Only labels that are
created in the current drawing can be modified in the current drawing.
Labels that were created in an externally referenced drawing must be
modified in the source drawing.

2

In the Alignment Labels dialog box, specify the following parameters:

■

Type: Geometry Points

■

Geometry Point Label Style: Perpendicular With Tick And Line

3

Click Add.

NOTE

The Import Label Set button applies a label set that exists in the current

drawing.

4

In the Geometry Points dialog box, click OK.

5

In the Alignment Labels dialog box, specify the following parameters:

■

Type: Design Speeds

■

Design Speed Label Style: Station Over Speed

6

Click Add.

7

Click OK.

On the Main Street alignment, labels are displayed at each station at
which a new design speed is applied, and at each geometry point. These
label objects reside in the current drawing and annotate the alignment
in the externally referenced drawing.

Exercise 1: Adding Labels in Groups | 751

Summary of Contents for AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands