manualshive.com logo in svg

Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Share
Download
Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS Tutorials Manual Download Page 229

Exercise 2: Adding Free Curves and Spirals to an
Alignment

In this exercise, you will add a free curve and a free spiral-curve-spiral to a
simple alignment.

The drawing contains a simple alignment consisting of three tangents. In the
next few steps, you will add free curves at circles B and C.

For more information, see the AutoCAD Civil 3D Help topics Adding Curves
and Adding Curves with SpiralsAdding Curves with Spirals.

This exercise continues from 

Exercise 1: Creating an Alignment with the

Alignment Layout Tools

 (page 214).

Add a free curve between two tangents

1

Open Align-2.dwg, which is located in the 

tutorial drawings folder

 (page

819)

.

2

Set your drawing window so that you can see circles B and C on the
surface.

3

If the Alignment Layout Tools toolbar is not open, select the alignment.
Right-click and click Edit Alignment Geometry.

4

In the Alignment Layout Tools toolbar, click the drop-down list 

 .

Select 

Free Curve Fillet (Between Two Entities, Radius).

5

As prompted on the command line, click the tangent that enters circle
B from the left (the ‘first entity’).

6

Click the tangent that exits from circle B on the right (the ‘next entity’).

7

Press Enter to select the default value of a curve less than 180 degrees.

8

Enter a radius value of 200. The curve is drawn between the tangents as
specified.

Add a free spiral-curve-spiral between two tangents

1

In the Alignment Layout Tools toolbar, click the arrow next to 

 . Select

Free Spiral-Curve-Spiral (Between Two Entities).

Exercise 2: Adding Free Curves and Spirals to an Alignment | 217

Summary of Contents for AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands