Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS, Tutorials Manual

Page: 727 / 840

from the Edit Part Sizes dialog box toolbar. The Edit Values dialog box is
displayed.
28 Change the current value to 48. Then use the Add button to create values
of 60, 72, 84, 96, 108, and 120. This makes it so that the Structure Length
parameter can be adjusted in 12-inch increments.
29 Repeat this step for the SBSW column, creating values of 36, 48, 60, and
72.
30 Set the value of SBSL to 120 and the value of SBSW to 60. Click the Update
Model button in the Edit Part Sizes dialog box toolbar. This updates the
values under Model Parameters to match the Part Parameters.
31 Click OK. Right-click Model Parameters and then click Edit. Click LenA1,
and then click Calculator.
32 Click Variable, and then click SBSL. Click OK, and then Close.
33 Repeat these steps for LenA2, equating it to SBSW. The model is updated
to reflect the changes to the dimensions.
34 Right-click Size Parameters and then click Edit Configuration. Click New.
The New Parameter dialog box is displayed.
35 Click Frame Length, and then click OK. Click New, then click Frame
Width, OK. Two new parameters have been added: frame length (SFL)
and frame width (SFW).
36 Scroll to the right until you see the SFL and SFW columns. Change
Constant to List for each of these columns. Then change the view to
Values.
Exercise 2: Defining the Vault Top Section Geometry | 715