4BRELAY SETTINGS
0BDEVICE CONFIGURATION
Enable:
Enables/disables the function. If it is not enabled, it is not evaluated.
Cold Load Time (s):
Time (in seconds) to wait without current signal to
determine if cold load conditions are met. Its value varies from 0 to 1000s with
increments of 1s.
Pickup Time (s):
The settings changes in cold load presence are held for this
time (in seconds). Once cold load is detected, this function’s settings are held
the time configured in this parameter. Its value varies from 0.1 to 3600s with
increments of 0.01s.
Pickup (%Inom):
Activation value
Restore (%Inom):
Restore value
The following parameters can be configured in the
Inverse Time Settings
section:
Enable:
Enables/disables the function. If it is not enabled, it is not evaluated.
Pickup (A):
Pickup current.
Curve:
Types of families of curves available at the relay.
Curve Family:
Curve family of the type previously selected.
TCC Modifiers:
Select the modifiers of the selected curve.
The following parameters can be configured in the
Instantaneous Settings
section:
Enable:
Enables/disables the function. If it is not enabled, it is not evaluated.
Pickup (A):
Pickup current.
Def. time (s):
Time to trip after pickup.
Summary of Contents for smART P500
