![background image](http://html1.mh-extra.com/html/arteche/smart-p500/smart-p500_instruction-manual_2977391383.webp)
POINT LIST
0BDNP3 PROTOCOL PROFILE
When outputs are configured to work with double point control, there are two indexes for
each controlled point. One of them is used for opening and the other for closing.
4.5.4.1. SINGLE POINT CONTROL
The following table contains the list of the digital outputs that can be configured in
single point control, using proART® software.
Outputs
Description
rOpenPa
Phase A or Three-pole Opening Command
rOpenPb
Phase B Opening Command
rOpenPc
Phase C Opening Command
rSetG1enabled
Setting Group #1 active
rSetG2enabled
Setting Group #2 active
rSetG3enabled
Setting Group #3 active
rSetG4enabled
Setting Group #4 active
rSetG5enabled
Setting Group #5 active
rSetG6enabled
Setting Group #6 active
rTestBatRem
Start External Battery Test
rGC1
General Purpose Flag, to be used with communications
rGC2
General Purpose Flag, to be used with communications
rGC3
General Purpose Flag, to be used with communications
rGC4
General Purpose Flag, to be used with communications
rGC5
General Purpose Flag, to be used with communications
rGC6
General Purpose Flag, to be used with communications
rGC7
General Purpose Flag, to be used with communications
rGC8
General Purpose Flag, to be used with communications
rGC9
General Purpose Flag, to be used with communications
rGC10
General Purpose Flag, to be used with communications
rGC11
General Purpose Flag, to be used with communications
rGC12
General Purpose Flag, to be used with communications
rGC13
General Purpose Flag, to be used with communications
rGC14
General Purpose Flag, to be used with communications
rGC15
General Purpose Flag, to be used with communications
bLocRem
Toggle Local/Remote Mode
r79Enabled
Recloser in Service
Summary of Contents for smART P500
