4BRELAY SETTINGS
0BDEVICE CONFIGURATION
Line Minimum Voltage:
Minimum phase to ground voltage in line on the line
side necessary for the function to activate. For lower voltages the function
does not activate
Bus Minimum Voltage:
Minimum phase to ground voltage in bus side
necessary for the function to activate. For lower voltages the function does not
activate
Undervoltage Permission
Dead Line/Dead Bus:
Closing when no voltage on the line side and no on the
bus side
Dead Line/Live Bus:
Close when no voltage on the line side and yes on the
bus side
Live Line/Dead Bus:
Close when no voltage on the bus side and and yes on
the line side
Synchrocheck Permission
Minimum time:
The pre-set conditions must be matched for at least this period
of time for synchronization to exist.
Minimum Voltage:
Minimum phase to ground voltage necessary for the
function to activate. For lower voltages the function does not activate
Angle difference:
Enable:
Enables/disables the comparison of the angular magnitudes at
both sides of the switch.
Difference (º):
Highest angular difference between voltages to enable the
synchronization condition.
Magnitude difference
Enable:
Enables/disables the comparison of the voltage magnitudes at both
sides of the switch.
Difference (V):
Highest magnitude difference between voltages to enable
the synchronization condition.
Summary of Contents for smART P500
