![background image](http://html1.mh-extra.com/html/arteche/smart-p500/smart-p500_instruction-manual_2977391283.webp)
7BVIEWING OPTIONS
0BDEVICE CONFIGURATION
values of the cycle of each item to be playing. If the cursor is not positioned
within the gratico will display the values of the first cycle.
Harmonics graph:
Shows a bar diagram that represents the magnitude of the
15 first harmonic components of the signal associated to its color and selected
in the section “Signals to be shown”.
Phasors
: Absolute value and argument of the voltage and current signals
selected in the section “Signals to be shown”. The absolute value and the
argument of the vectors will change as the cursor position within the waveform
graphic changes. The control “Fixed Angle” can be used to fix the vector
arguments and only express their absolute value and the control “Rotation
Direction” to define in which direction the vector angles will be shown:
clockwise or counterclockwise. Both controls are located within the section
“Convention”.
Calculations:
Shows a table with 88 calculations made from the information
obtained from the waveforms recorded by the relay. The absolute value and
the argument of each one of the calculations is shown. As in the other
sections, the result of the calculations will be different as the cursor position in
the waveform graphic changes.
Signals to be shown:
Selection of the voltage and current channels to be
shown in the waveform graphic. To change the color used by a channel in the
graphics, click on the color to change and select a different color from the color
bar that appears.
Zoom:
Zooming of the voltage (V) and current (I) channels presented in the
waveform graphic. The channels can be zoomed in or out using the Zoom
in/Zoom out buttons.
Fixed Angles:
Used to fix the arguments of the voltage and current vectors
from the section “Vectors”. Thus, the vectors will only represent their absolute
value and not their phase angle each time the cursor changes its position in
the waveform graphic. To fixing or release angles, click on the button on the
left.
Rotation Direction:
Defines whether the vectors shown in the section
“Vectors” will rotate clockwise or counterclockwise when the cursor changes its
Summary of Contents for smART P500
