![background image](http://html1.mh-extra.com/html/arteche/smart-p500/smart-p500_instruction-manual_2977391104.webp)
1BPROTECTION FUNCTIONS
PROTECTION, CONTROL AND METERING FUNCTIONS
fulfilled the internal flag for “close permission” is activated, otherwise the
“synchronization failure” flag is activated.
The function compares the voltage signals from the same phase at both sides of the
switch (bus or generation with line or load) so they must have the same
transformation ratios. The user can select the phase with which to perform the
comparison.
Figure 2-34 shows the logical diagram for the synchrocheck function with low voltage
permission.
Figure 2-34 Synchrocheck function elements. Low voltage permission.
The conditions for a close permission are the following:
Low voltage permission.
Permission is given when there is no voltage at one
or both sides of the switch according to the following settings:
V
Línea
V
min. Línea
Low voltage
permission
+
-
+
-
V
Barra
I
min. Barra
Line and Bus
“dead”
A
Line ‘dead’
Bus ‘live’
Line ‘live’
Bus ‘dead’
Line ‘live’
Bus ‘dead’
V
s
V
p
ang
ang
-
abs
+
-
Programmed angular difference
Active Angle
Check
V
A
M
F
TCC
0
Synchronism
permission
blk25Ang
blk25Mag
blk25freq
Summary of Contents for smART P500
