Arteche smART P500, Instruction Manual

Page: 355 / 562

POINT LIST
0BDNP3 PROTOCOL PROFILE
The dead-band limits are configured with the proART® software. When events of class 1
are required from the smART P500, events caused by binary inputs are reported. Class 2
contains the analog channels events and in class 3 contains the counters events.
4.5. POINT LIST
The list of points is set using the proART® software. It is formed by 50 configurable points
for binary inputs, 50 points for analog inputs, 50 for counters and 30 for outputs.
All points configured using the proART® software in external tables of points are included
in scans of class 0. Responses include up to the final configured point. If there are no
configured points, between the top of the table and the last one configured, the
corresponding values are reported as 0.
4.5.1. ANALOG POINTS
A list of the analog variables that can be configured using proART® software is
presented in the following table. Column “Scale” is interpreted as an equivalence in
engineering units.
Variable Description Scale Units
Feed Side
Ia Magnitude Phases A currents 0,001 A
AngIa Angle Phases A currents 0,001 Grades
Ib Magnitude Phases B currents 0,001 A
AngIb Angle Phases B currents 0,001 Grades
Ic Magnitude Phases C currents 0,001 A
AngIc Angle Phases C currents 0,001 Grades
In Magnitude for Calculated Neutral Current 0,001 A
AngIn Angle for Calculated Neutral Current 0,001 Grades
Ig Magnitude for Ground measured current 0,001 A
AngIg Angle for Calculated Neutral Current 0,001 Grades
Va Magnitude for Phase A Voltage 0,001 V
AngVa Angle for Phase A Voltage 0,001 Grades
Vb Magnitude for Phase B Voltage 0,001 V
AngVb Angle for Phase B Voltage 0,001 Grades