Arteche smART P500, Instruction Manual

Page: 195 / 562

2BGLOBAL SETTINGS
0BDEVICE CONFIGURATION
3.2.3.1. HARDWARE CONFIGURATION
Figure 3-12 shows internal parameters nominal voltage and rated current, which
cannot be changed.
Figure 3-12 System Setup/Hardware Configuration
All configuration windows have two columns with the names “PC” and “Relay”. The
“PC” column contains the information currently in use at the computer. The “Relay”
column shows the values currently stored in the internal memory of the relay. When
any difference exists between these two columns, the different parameter/s appear/s
in red. In order to make the differences disappear, use the option Send Configuration;
this operation stores the parameters that are currently active in the PC, into the
internal memory of the relay.
3.2.4. TIME AND DATE
Here the user can define the time parameters used for the operation of the relay.
3.2.4.1. IRIG-B SYNCHRONIZATION
Configuration of the synchronization input as shown in Figure 3-13.