![background image](http://html1.mh-extra.com/html/arteche/smart-p500/smart-p500_instruction-manual_2977391125.webp)
2BOTHER FUNCTIONS
PROTECTION, CONTROL AND METERING FUNCTIONS
2.2.3.1. SETTING RANGES (1 GROUP)
Table 2-30 shows the settings range for the fuse loss function (60FL)
Setting
Minimum
Maximum
Step
Notes
Enable
YES/NO
Reclose Number
1
3
1
Number of Group to enable
1
6
1
Table 2-28 Settings range for the Melting Fuse function
Figure 2-50 shows the logical diagram for the Melting Fuse function
Figure 2-50 Melting Fuse Function
It is important that you select a setting group where the reclosing function is active, so
that the operation of this function is adequate.
If the user selects an alternative group with no active reclosing function, the relay
returns to the initial group and the reclosing cycle starts again, if trips occur.This
behavior shall be recorded in the event log.
If the user sets in the alternative group, the recloser function with a number of shots
less than or equal to those of the initial setting group, the relay returns to the initial
one and goes to definitive trip condition of the recloser function. This behavior shall
be recorded in the event log.
2.2.4. SECTIONALIZER
This is not a protection element, but is a great option for solving several protection
coordination issues. They don’t have the capability of opening in case of fault.
blkFusMelt
blkAnyProt
rFuseFailPkup = 1
Melting Fuses Push Button
rFuseFailPkup (communications)
Setting Group = Group
FF
Summary of Contents for smART P500
