3-54
CC013D
6. While holding the chain, slide the sprocket and
camshaft out of the cylinder head.
CC014D
7. Remove the cap screw securing the chain ten-
sioner (account for a washer); then remove the ten-
sioner.
CC266D
NOTE: Loop the chain over the cylinder and
secure it to keep it from falling into the crankcase.
8. Remove the five nuts securing the cylinder head to
the cylinder.
CC017D
CC018D
CC016D
9. Remove the cylinder head from the cylinder,
remove the gasket, and account for two alignment
pins; then remove the cam chain guide.
CC020D
AT THIS POINT
To service valves and cylinder head, see Servicing
Top-Side Components sub-section.
Next
Back
Section
Table of Contents
Manual
Table of Contents
