3-32
21. Remove the four cap screws securing the oil
strainer cap; then remove the Phillips-head screws
securing the oil strainer. Account for the O-ring.
MD1207
Servicing Right-Side
Components
NOTE: Whenever a part is worn excessively,
cracked, damaged in any way, or out of tolerance,
replacement is necessary.
INSPECTING CENTRIFUGAL
CLUTCH SHOE
1. Inspect the clutch shoe for uneven wear, chips,
cracks, or discoloration.
2. Inspect the depth of the grooves in the clutch
shoes. If any shoe is worn to the bottom of the
groove, replace the complete set.
ATV1014
INSPECTING CENTRIFUGAL
CLUTCH HOUSING
1. Inspect the clutch housing for burns, marks, scuffs,
cracks, scratches, or uneven wear.
2. If the housing is damaged in any way, the housing
must be replaced.
INSPECTING PRIMARY
ONE-WAY DRIVE
1. Place the one-way clutch onto the clutch shoe
assembly with the green dot or the word “OUT-
SIDE” directed away from the clutch shoe.
KC330
2. Place the clutch housing onto the clutch
shoe/one-way clutch.
NOTE: It will be necessary to rotate the clutch
housing counterclockwise to properly seat the
one-way clutch.
AT THIS POINT
To service center crankcase components only, pro-
ceed to Separating Crankcase Halves.
CAUTION
Always replace clutch shoes as a complete set or
severe imbalance could occur.
Next
Back
Section
Table of Contents
Manual
Table of Contents
