2-3
2
Periodic Maintenance
This section has been organized into sub-sections
which show common maintenance procedures for the
Arctic Cat ATV.
NOTE: Arctic Cat recommends the use of new
gaskets, lock nuts, and seals and lubricating all
internal components when servicing the
engine/transmission.
NOTE: Some photographs and illustrations used
in this section are used for clarity purposes only
and are not designed to depict actual conditions.
NOTE: Critical torque specifications are located
in Section 1.
SPECIAL TOOLS
A number of special tools must be available to the
technician when performing service procedures in this
section.
NOTE: Special tools are available from the Arctic
Cat Service Parts Department.
Lubrication Points
It is advisable to lubricate certain components periodi-
cally to ensure free movement. Apply light oil to the
components using the following list as reference.
A. Throttle Lever Pivot/Cable Ends
B. Brake Lever Pivot/Cable Ends
C. Auxiliary Brake Cable Ends
D. Shift Lever Cable End
E. Idle RPM Screw (400/650)
Air Filter
Use the following procedure to remove the filter and
inspect and/or clean it.
CLEANING AND INSPECTING
FILTER
1. Remove the seat; then remove the appropriate
reinstallable rivets securing the storage compart-
ment.
CF260A
2. Raise the storage compartment cover; then slide
the cover forward and off the compartment.
Remove the storage compartment.
FI467
FI468
3. Unsnap the four spring-clip fasteners; then remove
the air filter cover.
Description
p/n
Compression Tester Kit
0444-213
Oil Filter Wrench
0644-389
Tachometer
0644-275
Timing Light
0644-296
Valve Clearance Adjuster
0444-255
Next
Back
Section
Table of Contents
Manual
Table of Contents
