3-129
3
GZ305
7. Remove the driveshaft (G); then remove the coun-
tershaft assembly (with shift forks) (H). Account
for three flat washers on the countershaft.
GZ280A
8. Remove the reverse idler gear (I), shaft bushing,
and two washers.
GZ279
NOTE: Do not disassemble the countershaft
assembly unless necessary. If necessary, see Ser-
vicing Center Crankcase Components sub-sec-
tion.
Disassembling
Crankcase Half
(Gen. II)
NOTE: For steps 1-8, refer to illustration GZ474A.
GZ474A
NOTE: To aid in installing, it is recommended that
the assemblies are kept together and IN ORDER.
1. Support the right-side crankcase assembly on suit-
able support blocks; then carefully remove the
crankshaft assembly (A) from the crankcase.
GZ298
2. Remove the snap ring securing the water pump
drive idler (B) to the idler shaft; then remove the
drive idler.
GZ299A
Next
Back
Section
Table of Contents
Manual
Table of Contents
