4-3
4
PR154B
6. Remove the throttle cable from the actuator arm.
PR162C
7. Loosen the outer jam nut securing the throttle
cable to the carburetor body; then route the cable
out of the way.
PR162B
8. Disconnect the electric choke lead from the wiring
harness.
9. Disconnect the vent hose; then remove the carbu-
retor.
DISASSEMBLING
1. Remove the four Phillips-head screws securing the
top cover; then remove the cover.
CH015D
2. Remove the vacuum piston assembly from the car-
buretor body. Account for a spring, spring seat,
and the jet needle.
CC746
3. Remove the three screws securing the pump hous-
ing. Account for the diaphragm assembly, spring,
and U-ring (in the housing).
CC748
4. Remove the Phillips-head screws securing the
float chamber; then remove the chamber. Account
for the O-ring.
Next
Back
Section
Table of Contents
Manual
Table of Contents
