3-79
3
CD991
5. Grease the driven gear pin and insert it into the oil
pump shaft; then install the driven gear (noting the
direction of the sides of the gear from removing).
Secure with a snap ring.
CD985A
CD984
NOTE: When installed correctly, the sides of the
drive and driven gears will be flush with each
other.
6. Install the clutch shoe assembly and secure with
the flange nut (threads coated with red Loctite
#271). Tighten to 221 ft-lb.
PR410A
7. Install the clutch cover alignment pins into the
crankcase, apply oil to the cover gasket, and install
the gasket onto the crankcase.
8. Install the one-way clutch onto the clutch shoe
assembly.
PR399A
9. Lightly grease the clutch housing seal; then insert
the left fixed-drive spacer.
CF088A
CAUTION
When installed correctly, the green alignment dot (or
the word OUTSIDE) on the one-way clutch is visible.
Next
Back
Section
Table of Contents
Manual
Table of Contents
