6-22
2. Remove the clutch pack from the clutch basket;
then remove the snap ring securing the clutch bas-
ket (A) to the input shaft (B) and remove the
clutch basket.
GZ392
GZ176A
GZ177
3. Remove the input shaft from the input housing;
then remove the oil seal.
GZ180
GZ182A
4. Remove the snap ring retaining the input bearing
and using an appropriate bearing driver, press the
bearing from the housing.
GZ184A
Cleaning and Inspecting
1. Wash all parts in parts cleaning solvent and dry
with compressed air.
2. Clean all gasket material and sealant from mating
surfaces.
3. Inspect bearings, shafts, and housing for excessive
wear, cracks, or discoloration.
4. Inspect the clutch basket for wear in splines or
cracks in the housing.
! WARNING
Always wear safety glasses when working with com-
pressed air.
Next
Back
Section
Table of Contents
Manual
Table of Contents
