6-7
6
CD106
3. Using a boot-clamp pliers (or suitable substitute),
remove the boot clamps; then remove the boots
and splined drive from the input shaft.
4. Remove the input shaft from the pinion housing.
CD107
5. Using a seal removal tool, remove the input shaft
seal. Account for a spacer.
AF982
6. Remove the snap ring securing the input shaft
bearing; then place the pinion housing in a press
and remove the bearing.
AF983
AF984
KX219
Assembling Input Shaft
1. Place the pinion housing in a press and install the
input shaft bearing. Secure the bearing with the
existing snap ring making sure the sharp edge of
the snap ring faces to the outside.
AF993
Next
Back
Section
Table of Contents
Manual
Table of Contents
