8-3
8
FI467A
5. Remove the storage compartment.
FI468
6. Remove the four cap screws securing the handle-
bar caps and speedometer bracket to the steering
post; then move the handlebar and speedometer
out of the way. Account for four handlebar caps.
CD762
7. Remove two cap screws securing the upper steer-
ing post bearing to the frame. Account for two
bearings and two housings.
CD760
8. Using a suitable lift stand, raise the ATV enough
to remove the front wheels.
CD685
9. Remove the cotter pins and slotted nuts from the
inner and outer tie rod ends; then remove the tie
rods from the steering post arm and the left-side
and right-side steering knuckles.
AF778D
KX039
Next
Back
Section
Table of Contents
Manual
Table of Contents
