3-45
3
KC235
KC236
5. Connect the stator coil, trigger coil, and gear posi-
tion switch connectors; then attach the engine
ground cable and starter cable and secure with cap
screws and nuts. Tighten to 8 ft-lb.
KC228C
KC228B
6. Set the inlet air silencer into the frame; then install
the exhaust pipe using a new exhaust pipe seal and
grafoil seal. Tighten the cap screws evenly to 20
ft-lb and install the muffler retainer springs.
KC237
KC238
KC170
7. Place the carburetor into the intake pipe being
careful to align the lug on the carburetor with the
alignment tabs on the air intake pipe; then tighten
the clamp securely.
Next
Back
Section
Table of Contents
Manual
Table of Contents
