3-91
3
16. Secure the crankcase vent hose to the air cleaner
housing; then secure the inlet boot and carbure-
tor/throttle body to the air filter housing.
CD787
CD785
17. Secure the shift rod to the engine with a new
E-clip.
CD774
18. Place the left-side footwell and foot peg in posi-
tion on the frame; then secure with existing hard-
ware. Tighten securely.
19. Install the front body panel with existing hard-
ware.
20. Connect the hose to the fuel pump/fuel rail; then
connect the vacuum hose and secure with hose
clamps (650) or connect the gasline hose connec-
tor to the fuel rail (EFI).
CD766A
FI092E
21. Install the side panels into position.
22. Place the battery into position in the battery com-
partment; then install the battery cables and vent
hose. Secure with the battery cover.
23. Add proper amounts of engine/transmission oil
and coolant.
24. Install the seat.
CAUTION
Battery acid is harmful if it contacts eyes, skin, or
clothing. Care must be taken whenever handling a bat-
tery.
CAUTION
If the engine had a major overhaul or if any major part
was replaced, proper engine break-in procedures must
be followed (see Section 1). If the proper engine
break-in procedures are not followed, severe engine
damage may result.
Next
Back
Section
Table of Contents
Manual
Table of Contents
