AMX TPI-PRO-4, Operation/Reference Manual

Page: 84 / 218

Protected Setup Page
78 TPI-PRO/DVI (Total Presentation Interface)
Refer to the Using G4 Web Control® section on page 175 for more detailed instructions on how to use the G4
Web Control page with the web-based NetLinx Security application.
Protected Setup - Other Settings
Select Other Settings on the Protected Setup Page (see FIG. 69 on page 71) to open a slider with the
following options (FIG. 73):

Cache - Press to access the Cache Page (FIG. 74)

Passwords - Press to access the Password Settings Page (FIG. 75 on page 81)
Protected Setup - G4 Web Control Page (Cont.)
• Web Control
Name:
The unique alpha-numeric string that is used as the display name of the
TPI-PRO-DVI within the Web Control tab of the NetLinx Security browser window.
Set the name through the Device Name field on the Protected Setup Page.
This Web Control tab displays a G4 icon alongside the link to the Web Control Name
given to this TPI-PRO/DVI.
• Web Control
Password:
Allows you to enter the G4 Authentication session password associated for VNC web
access of this TPI-PRO/DVI.
• Web Control
Port:
Allows you to enter the port value that the VNC Web Server runs on.
• Default = 5900 .
• Max Number
of Connections:
Allows you view and set the maximum number of users (up to four) that can be simul-
taneously connected to the target TPI-PRO/DVI via G4 Web Control.
Press to cycle through the selection options.
• Range = 1-4.
• Default = 1 .
• Current Connection
Count:
This read-only field displays the current number of users connected to the target
TPI-PRO/DVI via the web.
Note: This value cannot exceed the Maximum number field.
G4 Web Control
Timeout: Sets the length of time (in minutes) the TPI-PRO/DVI can remain idle (no cursor
movements) before the session is closed and the user is disconnected.
• Range = 0-240 minutes (0 = G4 Web Control never times-out)
• Default = 15
FIG. 73 Protected Setup - Other Settings Slider