AMX TPI-PRO-4, Operation/Reference Manual

Page: 117 / 218

NetLinx Programming
111 TPI-PRO/DVI (Total Presentation Interface)
"^" Button Commands (Cont.)
^CPF
Clear all page flips
from a button.
Syntax:
"'^CPF-<vt addr range>'"
Variable:
• variable text address range = 1 - 4000.
Example:
SEND_COMMAND Panel,"'^CPF-500'"
Clears all page flips from the button.
^DPF
Delete page flips
from button if it
already exists.
Syntax:
"'^DFP-<vt addr range>,<actions>,<page name>'"
Variables:
• variable text address range = 1 - 4000.
• actions =
Stan [dardPage] - Flip to standard page
Prev [iousPage] - Flip to previous page
Show [Popup] - Show Popup page
Hide [Popup] - Hide Popup page
Togg [lePopup] - Toggle popup state
ClearG [roup] - Clear popup page group from all pages
ClearP [age] - Clear all popup pages from a page with the specified page name
ClearA [ll] - Clear all popup pages from all pages
• page name = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'^DPF-409,Prev'"
Deletes the assignment of a button from flipping to a previous page.
^ENA
Enable or disable
buttons with a set
variable text
range.
Syntax:
"'^ENA-<vt addr range>,<command value>'"
Variables:
• variable text address range = 1 - 4000.
• command value = (0= disable, 1= enable)
Example:
SEND_COMMAND Panel,"'^ENA-500.504&510.515,0'"
Disables button pushes on buttons with variable text range 500-504 & 510-515.
^FON
Set a font to a
specific Font ID
value for those
buttons with a
defined address
range.
Font ID numbers are generated by the TPDesign4 programmers report.
Syntax:
"'^FON-<vt addr range>,<button states range>,<font value>'"
Variables:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
• font value = range = 1 - XXX. Refer to the Default Font Styles and ID Numbers table on
page 89.
Example:
SEND_COMMAND Panel,"'^FON-500.504&510.515,1&2,4'"
Sets the font size to font ID #4 for the on and off states of buttons with the variable text
range of 500-504 & 510-515.
Note: The Font ID is generated by TPD4 and is located in TPD4 through the Main menu
(Panel > Generate Programmer's Report >Text Only Format >Readme.txt).