AMX TPI-PRO-4, Operation/Reference Manual

Page: 62 / 218

TPI-PRO/DVI Configuration Pages
56 TPI-PRO/DVI (Total Presentation Interface)
The TPI-PRO/DVI’s output resolution must match the output resolution and refresh rate set on the connected
touch monitor.

The default TPI-PRO/DVI output resolution is 1280 x 1024 @ 60Hz .

The maximum output resolution setting is 1920x1200 @ 60Hz .

For a listing of available output resolutions and refresh rates, see the Supported Output
Modes section on page 200.
Refer to the Setting the Output Resolution section on page 34 for instructions on adjusting the TPI-PRO/DVI’s
output resolution. Also see the ORES Send Command on page 132.
Panel Information Page
Press the TOUCH pushbutton on the front panel (see FIG. 54 on page 55) to access the Panel Information
Page (FIG. 56).
The Panel Information Page displays various properties of the TPI-PRO/DVI ( read-only ):
FIG. 56
Panel Information Page
Panel Information Page
Back: Saves the changes and returns to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current update
of the TPI-PRO/DVI’s connection status regardless of what page is currently active.
• A Lock only appears on the icon if the TPI-PRO/DVI has established a connection
with a currently secured target Master ( requiring a username and password ).
• Panel Type: Displays the type of G4 device (TPI-PRO/DVI) being used.
• Firmware Version: Displays the version of G4 firmware currently loaded.
• Setup Port: Displays the TPI-PRO/DVI’s Setup Port value.
• High Port: Displays the TPI-PRO/DVI’s high port (port count) value.
• High Address: Displays the TPI-PRO/DVI’s high address (address count) value.
• High Channel: Displays the TPI-PRO/DVI’s high channel (channel count) value.
• High Level: Displays the TPI-PRO/DVI’s high level (level count) value.