AMX TPI-PRO-4 Operation/Reference Manual Download Page 176

Page: 176 / 218

Upgrading Firmware

170

TPI-PRO/DVI (Total Presentation Interface)

This is to alert you to the fact that configuration settings for an active system have been changed, while
connected to a NetLinx Master.

In order for the new settings to be applied, communications between the PC and the Master will be
stopped, then restarted using the new settings.

Click

Yes

to interrupt the current communication from the Master and apply the new settings.

11.

Open the

Reboot the Master Controller

dialog (Tools > Reboot the Master Controller), and click

Reboot

to reboot the NetLinx Master and incorporate any changes (FIG. 88).

12.

When the dialog box replies with

"Reboot of system complete",

press

Done

13.

Click the

OnLine Tree

tab in the Workspace window to view the devices on the System. The default

System value is 1 (one).

14.

Right-click the

Empty Device Tree/System

entry, and select

Refresh System

to re-populate the list.

FIG. 87

NetLinx Studio - warning dialog

FIG. 88

NetLinx Studio - Reboot the Master Controller dialog

Summary of Contents for TPI-PRO-4



























































































































































































































Search results

Summary of Contents for TPI-PRO-4

Reviews:

Related manuals for TPI-PRO-4

Brands by name

Popular brands

AMX TPI-PRO-4, Operation/Reference Manual

Search results

Summary of Contents for TPI-PRO-4

Reviews:

Related manuals for TPI-PRO-4

Brands by name

Popular brands