AMX TPI-PRO-4, Operation/Reference Manual

Page: 50 / 218

Configuring Communication Settings
44 TPI-PRO/DVI (Total Presentation Interface)
Configuring TPI-PRO/DVI IP Settings
Configure the IP Settings for the TPI-PRO/DVI via options in the System Settings page. IP Settings for the
TPI-PRO/DVI can be configured via either DHCP or a reserved Static IP Address, as described in the
following sub-sections:
Configuring a DHCP Address
1.
Press the System Settings button on the Protected Setup page (FIG. 36 on page 41) to open the System
Settings page (FIG. 41 on page 43).
2.
In the IP Settings section (FIG. 42), press the DHCP/Static button until the choice cycles to DHCP .
3.
Press Host Name button to open an on-screen Keyboard, and enter an alpha-numeric string for the Host
Name.

If the Host Name is left blank, it will automatically resort to the default - " localhost ".

Press Done to close the on-screen Keyboard.
4.
Press the Back button to return to the Protected Setup page.
5.
Reboot
the TPI-PRO/DVI (see the
Rebooting the TPI-PRO/DVI
section on page 54).
FIG. 42 System Settings page - IP Settings
Press to cycle through options, select DHCP (default setting )
Do not alter these values when using DHCP
If left blank, defaults to "Local Host"
Do not alter any of the remaining fields in the IP Settings section.
Once the TPI-PRO/DVI is rebooted, these values are obtained by the unit and
displayed in the DNS fields.