AMX TPI-PRO-4, Operation/Reference Manual

Page: 21 / 218

Cable Details and Pinout Information
7 TPI-PRO (Total Presentation Interface)
Cable Details and Pinout Information
Overview
The VIDEO/VGA Input connectors on the rear panel are used to connect source input devices to the TPI-PRO
(FIG. 3). The TPI-PRO routes video from connected source input devices to the connected output devices.
Each connector supports VGA, S-video, Composite and Component inputs.
In order to connect non-VGA input source devices (S-Video, Composite and Component) to the VIDEO/VGA
Input connectors, the following (optional) adapter cables are required:
VGA-to-Component (RGB)/Composite Cable Pinout Information
The following table lists the pinout configuration for HD-15 connector to Component (RGB) or
Composite connectors:
FIG. 3 VIDEO/VGA Inputs
Input Adapter Cables
Name Description Length FG#
• CC-HD15M-RCAM3 HD-15 to 3x Male RCA Connectors 6’ (1.828m) FG10-2170-03
• CC-HD15M-HD15M HD-15 Male to HD-15 Male Connector 6’ (1.828m) FG10-2170-01
• CC-HD15M-SVIDM HD-15 Male to S-Video Male Connector 6’ (1.828m) FG10-2170-04
VGA IN to Component (RGB) or Composite Pinouts
VGA Pin VGA Signal Component Signal Red RCA Green RCA Blue RCA
1 Red Pr signal center pin
2 Green Y signal center pin
3 Blue Pb signal center pin
4 N/C
5 GND
6 RAGND Pr - Return shield
7 GAGND Y - Return shield
8 BAGND Pb - Return shield
9 +5VDC
10 SAGND
11 N/A
12 DDC_SDA
13 HSYNC
14 VSYNC
15 DDC_SDL
Input 4
Note: The TPI-PRO-4 (shown here) has four VIDEO/VGA Inputs, the TPI-PRO-2 has two Inputs
Input 3 Input 2 Input 1