AMX TPI-PRO-4, Operation/Reference Manual

Page: 100 / 218

NetLinx Programming
94 TPI-PRO/DVI (Total Presentation Interface)
Page Commands (Cont.)
@PHE
Set the hide effect
for the specified
pop-up page to
the named hide
effect.
Syntax:
"'@PHE-<popup page name>;<hide effect name>'"
Variables:
• popup page name = Name of the page on which the pop-up is displayed (1 - 50 ASCII
characters).
• hide effect name = Refers to the pop-up effect names being used.
Example:
SEND_COMMAND Panel,"'@PHE-Popup1;Slide Left'"
Sets the Popup1 hide effect name to ’Slide Left’.
@PHP
Set the hide effect
position.
Only 1 coordinate is ever needed for an effect, however, the command will specify both.
This command sets the location at which the effect will end at.
Syntax:
"'@PHP-<popup page name>;<x coordinate>,<y coordinate>'"
Variable:
• popup page name = 1 - 50 ASCII characters. Name of the page on which the pop-up is
displayed.
Example:
SEND_COMMAND Panel,"'@PHP-Popup1;75,0'"
Sets the Popup1 hide effect x-coordinate value to 75 and the y-coordinate value to 0.
@PHT
Set the hide effect
time for the
specified pop-up
page.
Syntax:
"'@PHT-<popup page name>;<hide effect time>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the page on which the pop-up is
displayed.
• hide effect time = Given in 1/10ths of a second.
Example:
SEND_COMMAND Panel,"'@PHT-Popup1;50'"
Sets the Popup1 hide effect time to 5 seconds.
@PPA
Close all pop-ups
on a specified
page.
Same as the ’Clear Page’ command in TPDesign4.
Note: If the page name is empty, the current page is used.
Syntax:
"'@PPA-<page name>'"
Variable:
• page name = 1 - 50 ASCII characters. Name of the page on which the pop-up is
displayed.
Example:
SEND_COMMAND Panel,"'@PPA-Page1'"
Close all pop-ups on Page1.