AMX TPI-PRO-4, Operation/Reference Manual

Page: 98 / 218

NetLinx Programming
92 TPI-PRO/DVI (Total Presentation Interface)
SEND_COMMANDs

New command format starts with a '^'

'^' commands have the capability of assigning a variable text address range and button state range.

Variable text address ranges allow the user to target 1 or more variable text channels in a single
command.

Button States range allow the user to target 1 or more states of a variable text button with a single
command.

"." Character is used for the 'through' notation and "&" character is used for the 'And' notation to
specify the variable text address range and Button States range.
Example:
SEND_COMMAND D:P:S,"'^JSB-500.504&510.515,1&2,1'"

'^JSB-' - Set picture alignment

'500.504&510.515' - For variable text range 500-504 & 510-515

'1&2' - For the OFF & ON states of the button

'1' - Picture alignment to upper left corner