AMX TPI-PRO-4 Operation/Reference Manual Download Page 18 | Manualshive

Page: 18 / 218

background image

TPI-PRO (Total Presentation Interface)

4

TPI-PRO (Total Presentation Interface)

TPI-PRO Specifications (Cont.)

• Serial Touch

Drivers:

Go to

http://www.amx.com//techdocs/TPI-PRO.Supported.Touch.Monitors.xls

to

view/download the most recent List of Touch Monitors and USB Touch Drivers
Tested with the TPI-PRO/DVI (including the most current listing of tested serial
touch panel drivers).

• USB Drivers:

USB Touch drivers are automatically loaded when the USB Touch Monitor is
detected.

Note: Go to

http://www.amx.com//techdocs/TPI-PRO.Supported.Touch.Moni-

to view/download the most recent List of Touch Monitors and USB / Serial

Touch Drivers Tested with the TPI-PRO (including the most current listing of tested
USB touch panel drivers).

• Button

Assignments:

Button assignments can be modified in TPD4 (not on the TPI-PRO.)

• Button channel range: 1 - 4000 button push and feedback (per address port)

• Button variable text range: 1 - 4000 (per address port)

• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)

• Level range: 1 - 600 (Default level value 0-255, can be set up to 1-65535)

• Address port range: 1 - 100

• Communication/

Programming:

Master communication and programming is available via an Ethernet connection.
Refer to the

Configuring the Ethernet Connection on the NetLinx Master

page 47 for more information.

There are several methods of TPI-PRO communication and programming available:

• DHCP - Refer to the

Configuring a DHCP Address

section on page 44 for more

information.

• Static IP - Refer to the

Configuring a Static IP Address

section on page 45.

• URL - Refer to the

NetLinx Master IP Address - URL Mode

section on page 47.

• Listen - Refer to the

NetLinx Master IP Address - Listen Mode

section on page 49.

• Auto - Refer to the

NetLinx Master Ethernet IP Address - Auto Mode

• NPD (UPD) - Refer to the

NetLinx Master Ethernet IP Address - NDP (UDP)

section on page 50.

• URL (UPD) - Refer to the

NetLinx Master Ethernet IP Address - URL (UDP)

section on page 53.

• Enclosure:

Metal with black matte finish

• Operating/

Storage
Environment:

• Operating Temperature: 0° C (32° F) to 40° C (104° F)

• Operating Humidity: 5% to 85% RH Non-Condensing

• Storage Temperature: -10° C (14° F) to 70° C (158° F)

• Storage Humidity: 0% to 85% RH Non-Condensing

• Dimensions (HWD):

1.72" x 17.00" x 10.54" (4.37 cm x 43.18 cm x 26.77 cm)

• Weight:

8.25 lbs (3.74 kg)

• Certifications:

• RoHS

• FCC (Class B)

• CE

• IEC/EN60950

• Included

Accessories:

• 2-pin PWR connector (41-5025)

• Assembly Kit (Four-#10-32 screws and Four-#10 washers) (KA0001)

• Rack Ear brackets for shelf, wall, and under-table mounting (60-0900-03)

• NXA-USBTN, TakeNote USB Computer Control Stick (FG070-603)

«
...
16
17
18
19
20
...
»

Summary of Contents for TPI-PRO-4



























































































































































































































Reviews:

No comments

Related manuals for TPI-PRO-4

Brand: Paradyne Pages: 20

Compshere 3000 Series

Brand: Paradyne Pages: 2

ROADRECORDER 8000

Brand: Safety Vision Pages: 40

Brand: Belkin Pages: 72

MegaRAID SATA 300-4XLP

Brand: LSI Pages: 3

Brand: IEI Technology Pages: 86

Lite N42B1P Series

Brand: Dahua Technology Pages: 14

Power Control Processor

Brand: ETC Pages: 64

Core 2 Quad Q9400

Brand: Intel Pages: 2

UniFi Cloud Key

Brand: Ubiquiti Pages: 13

Brand: Eaton Pages: 14

Brand: VideoWave Pages: 12

Brand: Sony Ericsson Pages: 93

GEFORCE RTX 4090

Brand: Nvidia Pages: 160

Brand: Fast Pages: 66

Xtreme Networked Boat

Brand: Broadband Products Pages: 16

Brand: Alphacool Pages: 9

BPN-SAS3-LB16A-N10

Brand: Supermicro Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands