AMX TPI-PRO-4, Operation/Reference Manual

Page: 103 / 218

NetLinx Programming
97 TPI-PRO/DVI (Total Presentation Interface)
Page Commands (Cont.)
@PSE
Set the show
effect for the
specified pop-up
page to the
named show
effect.
Only 1 coordinate is ever needed for an effect, however the command will specify both.
This command sets the location at which the effect will begin at.
Syntax:
"'@PSE-<popup page name>;<show effect name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the page on which the pop-up is
displayed.
• show effect name = Refers to the pop-up effect name being used.
Example:
SEND_COMMAND Panel,"'@PSE-Popup1;Slide from Left'"
Sets the Popup1 show effect name to ’Slide from Left’.
@PSP
Set the show
effect position.
Only 1 coordinate is ever needed for an effect; however, the command will specify both.
This command sets the location at which the effect will begin at.
Syntax:
"'@PSP-<popup page name>;<x coordinate>,<y coordinate>'"
Variable:
• popup page name = 1 - 50 ASCII characters. Name of the page on which the pop-up is
displayed.
Example:
SEND_COMMAND Panel,"'@PSP-Popup1;100,0'"
Sets the Popup1 show effect x-coordinate value to 100 and the y-coordinate value to 0.
@PST
Set the show
effect time for the
specified pop-up
page.
Syntax:
"'@PST-<popup page name>;<show effect time>'"
Variables:
• popup page name = Name of the page on which the pop-up is displayed (1 - 50 ASCII
characters).
• show effect time = Given in 1/10ths of a second.
Example:
SEND_COMMAND Panel,"'@PST-Popup1;50'"
Sets the Popup1 show effect time to 5 seconds.
PAGE
Flip to a specified
page.
Flips to a page with a specified page name. If the page is currently active, it will not redraw
the page.
Syntax:
"'PAGE-<page name>'"
Variable:
• page name = 1 - 50 ASCII characters. Name of the page on which the pop-up is
displayed.
Example:
SEND_COMMAND Panel,"'PAGE-Page1'"
Flips to page1.