AMX TPI-PRO-4, Operation/Reference Manual

Page: 25 / 218

Wiring and Device Connections
11 TPI-PRO (Total Presentation Interface)
Front Panel Connectors
The front panel connectors on both versions of the TPI-PRO are identical.
USB (Type A) Input ports
The two USB (Type A) Input ports on the front panel are used to connect USB touch/input devices to the
TPI-PRO (FIG. 7).
Note that there are two additional USB (Type A) Input ports on the rear panel. All of the USB Input ports have
the same functionality; they are provided on both sides of the TPI-PRO for ease-of-access (see FIG. 12 on
page 14).
SERIAL Port
The SERIAL (DB-9) port can be used for direct Serial (RS-232) configuration (FIG. 8).
See the Terminal/Telnet Commands section on page 165 for a listing of supported Terminal/Telnet commands.
FIG. 7 Front Panel USB (Type A) Input Ports
2 USB (Type-A) Input ports
Touch/input devices can consist of any combination of a keyboard, mouse, or USB-
capable touch screen.
FIG. 8 SERIAL (DB-9) Port
SERIAL Port - Pinouts and Signals
Pin Signal Pin Signal
1 n/c 6 n/c
2 RX 7 RTS
3 TX 8 CTS
4 n/c 9 n/c
5 GND
SERIAL (DB-9) Input port
1 2 3 4 5
6 7 8 9