AMX TPI-PRO-4, Operation/Reference Manual

Page: 99 / 218

NetLinx Programming
93 TPI-PRO/DVI (Total Presentation Interface)
Page Commands
The following NetLinx Page Commands are supported by the TPI-PRO/DVI, and are not case sensitive.
A device must first be defined in the NetLinx programming language with values for
the Device: Port: System (in all programming examples - Panel is used in place of
these values and represents all compatible G4 devices).
Page Commands
@APG
Add a specific
pop-up page to a
specified pop-up
group.
Add the pop-up page to a group if it does not already exist. If the new pop-up is added to a
group which has a pop-up displayed on the current page along with the new pop-up, the
displayed pop-up will be hidden and the new pop-up will be displayed.
Syntax:
"'@APG-<popup page name>;<popup group name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
• popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Panel,"'@APG-Popup1;Group1'"
Adds the pop-up page ’Popup1’ to the pop-up group ’Group1’.
@CPG
Clear all pop-up
pages from
specified pop-up
group.
Syntax:
"'@CPG-<popup group>'"
Variable:
• popup group = 1 - 50 ASCII characters. Name of the pop-up group.
Example:
SEND_COMMAND Panel,"'@CPG-Group1'"
Clears all pop-up pages from the pop-up group ’Group1’.
@DPG
Delete a specific
pop-up page from
specified pop-up
group if it exists.
Syntax:
"'@DPG-<popup page name>;<popup group name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the pop-up page.
• popup group name = 1 - 50 ASCII characters. Name of the pop-up group.
Example:
SEND_COMMAND Panel,"'@DPG-Popup1;Group1'"
Deletes the pop-up page ’Popup1’ from the pop-up group ’Group1’.
@PDR
Set the pop-up
location reset flag.
If the flag is set, the pop-up will return to its default location on show instead of its last drag
location.
Syntax:
"'@PDR-<popup page name>;<reset flag>'"
Variable:
• popup page name = Name of the page on which the pop-up is displayed (1 - 50 ASCII
characters).
• reset flag = 1 = Enable reset flag, 0 = Disable reset flag
Example:
SEND_COMMAND Panel,"'@PDR-Popup1;1'"
Popup1 will return to its default location when turned On.