AMX TPI-PRO-4, Operation/Reference Manual

Page: 15 / 218

TPI-PRO (Total Presentation Interface)
1 TPI-PRO (Total Presentation Interface)
TPI-PRO (Total Presentation Interface)
Overview
The TPI-PRO ( Total Presentation Interface ) transforms third party touch screens into interactive displays with
stunning control graphics and animation just like AMX Modero Touch Panels.
Using the TPI-PRO, third party touch screens can simultaneously display up to 4 fully-scalable video
windows, each supporting Composite, S-Video, Component, and VGA signals. Classrooms, courtrooms and
conference rooms can use the TPI-PRO to easily switch between any of the four simultaneously displayed
sources on the fly, as well as control content in real-time.
The TPI-PRO is the perfect tool to use with any large plasma or LCD display equipped with a touch overlay.
Alternatively, the TPI-PRO output can be displayed on any monitor or projector and a USB keyboard/mouse
can be used to navigate the system.
The TPI-PRO receives control and touch point information from a variety of pointing devices (i.e. touch
screen, mouse, or keyboard), and connects to the control system via Ethernet.
The TPI-PRO is available in two versions:

The TPI-PRO-4 (
FG2275-104)
supports up to four video/RGB inputs.

The TPI-PRO-2 (
FG2275-102
) supports up to two video/RGB inputs.
Both TPI-PROs support high resolution inputs/outputs:

Inputs (2 or 4)
: Accepts S-Video, Composite, Component (up to 1080p), and VGA (up to
1920x1200). Inputs can be scaled to fit into independent windows or viewed full-screen.

Outputs (2) : VGA up to 1920x1200 (WUXGA) at 60 Hz.
Basic features of both include:

Up to 4 video or graphics windows can be simultaneously displayed and controlled

USB (wired and wireless) mouse pass-through allows the presenter to view and control up to four
computers from one display
TPI-PRO Specifications
The following table lists the specifications for the TPI-PRO-4 and TPI-PRO-2.
Note that the primary difference between the TPI-PRO-4 and TPI-PRO-2 is in the number of inputs. In terms
of functionality and specifications, they are otherwise identical. Therefore, the specifications listed below
apply to both versions, unless specifically noted.
FIG. 1 TPI-PRO
TPI-PRO Specifications
• Power
Requirements:
• Constant current draw: 2.6 A @ 12 VDC
• The PSN6.5 Power Supply (FG423-41 - not included ) is recommended, to
accommodate all possible configurations and respective power draws.
• Memory: • 256 MB SDRAM
• 256 MB disk memory