Appendix
203
TPI-PRO/DVI (Total Presentation Interface)
Appendix
Text Formatting Codes for Bargraphs/Joysticks
Text formatting codes for bargraphs provide a mechanism to allow a portion of a bargraph’s text to be
dynamically provided information about the current status of the level (multi-state and traditional). These
codes would be entered into the text field along with any other text.
The following is a code list used for bargraphs:
By changing the text on a button (via a VT command) you can modify the codes on a button. When one of the
Text Formatting Codes is encountered by the firmware it is replaced with the correct value. These values are
derived from the following operations:
Given a current raw level value of 532, a range low value of 500 and a high range value of 600 the following
text formatting codes would yield the following strings as shown in the table below:
Bargraph Text Code Inputs
Code
Bargraph
Multi-State Bargraph
$P
Display the current percentage of the
bargraph (derived from the Adjusted
Level Value as it falls between the
Range Values)
Display the current percentage of the
bargraph (derived from the Adjusted
Level Value as it falls between the
Range Values)
$V
Raw Level Value
Raw Level Value
$L
Range Low Value
Range Low Value
$H
Range High Value
Range High Value
$S
N/A
Current State
$A
Adjusted Level Value (Range Low Value
subtracted from the Raw Level Value)
Adjusted Level Value (Range Low Value
subtracted from the Raw Level Value)
$R
Low Range subtracted from the High
Range
Low Range subtracted from the High
Range
$$
Dollar sign
Dollar sign
Formatting Code Operations
Code
Operation
$P
(Current Value - Range Low Value / Range High Value - Range Low Value) x 100
$V
Current Level Value
$L
Range Low Value
$H
Range High Value
$S
Current State (if regular bargraph then resolves to nothing)
$A
Current Value - Range Low Value
$R
Range High Value - Range Low Value
Example
Format
Display
$P%
32%
$A out of $R
32 out of 100
$A of 0 - $R
32 of 0 - 100
$V of $L - $H
532 of 500 - 600
Summary of Contents for TPI-PRO-4
