AMX TPI-PRO-4, Operation/Reference Manual

Page: 51 / 218

Configuring Communication Settings
45 TPI-PRO/DVI (Total Presentation Interface)
Configuring a Static IP Address
1.
Press the System Settings button on the Protected Setup page (FIG. 36 on page 41) to open the System
Settings
page (FIG. 41 on page 43).
2.
In the
IP Settings
section (FIG. 42), press the
DHCP/Static
button until the choice cycles to
Static
.
3.
Press the IP Address button to open an on-screen keypad, and enter the static IP address provided by
your System Administrator. Press Done to close the keypad.
4.
Repeat this process for Subnet Mask and Gateway .
5.
Press the Host Name button to open an on-screen keyboard, and enter an alpha-numeric string for the
Host Name (optional).

If the Host Name is left blank, it will automatically resort to the default - " localhost ".

Press Done to close the keyboard.
6.
Press the Primary DNS button to open an on-screen keypad, and enter the Primary DNS address
provided by your System Administrator. Press Done to close the keypad.
7.
Repeat this process for the Secondary DNS field.
8.
Press the Domain button to open an on-screen keyboard, and enter the unique, resolvable domain address
provided by your System Administrator. Press Done to close the keyboard.
9.
Press the Back button to return to the Protected Setup page.
10.
Reboot the TPI-PRO/DVI (see the Rebooting the TPI-PRO/DVI section on page 54).
Before you start, obtain a pre-reserved Static IP Address to assign to the
TPI-PRO/DVI from your System Administrator.
FIG. 43 System Settings page - IP Settings
Press to cycle through options, select Static