AMX TPI-PRO-4, Operation/Reference Manual

Page: 153 / 218

NetLinx Programming
147 TPI-PRO/DVI (Total Presentation Interface)
List View Commands (Cont.)
^LVS
Set the column
order for
sorting
Set the column order for sorting. Update must be called for changes to take effect.
Syntax:
SEND_COMMAND <DEV>,"'^LVS-<view address>,<column>,<column>…'"
Variables:
• view address = the address of the view definition
• column = the starting column number (first column is 1)
Example:
SEND_COMMAND Device,"'^LVS-3,5,2,1'"
Sets the column sort order to column 5 first, then column 2 and then column 1.
The data list is displayed according to the view definitions located at address 3.
^LVU
Update any
view currently
looking at this
list
Update any view currently looking at this list.
Note: This must be called after changes to list data.
Syntax:
SEND_COMMAND <DEV>,"'^LVU-<view address>'"
Variables:
• view address = the address of the view definition
Example:
SEND_COMMAND Device,"'LVU-3'"
Updates the data list and displays it according to the view definitions located at address 3.