AMX TPI-PRO-4, Operation/Reference Manual

Page: 46 / 218

Configuring Communication Settings
40 TPI-PRO/DVI (Total Presentation Interface)
The basic steps involved with configuring the TPI-PRO/DVI’s communications settings include:
1.
Assign a Device Number to the TPI-PRO/DVI (see page 40).
2.
Set the Serial Port Baud Rate (see page 41).
3.
Configure the Master Connection Settings (see page 42).
Assigning a Device Number to the TPI-PRO/DVI
1.
Press the front panel SETUP pushbutton to open the Setup page (FIG. 35).
2.
Press the Protected Setup button to open the Protected Setup page. This page is password-protected:
a.
Use the on-screen keypad to enter the default password - 1988.
b.
Press Done to close the keypad (FIG. 36).
3.
Enter a Device Number value for the TPI-PRO/DVI (FIG. 36):
a.
Press the red Device ID field to open the keypad.
b.
Enter a Device Number value for the TPI-PRO/DVI
.
c.
Press Done to assign the device number close the keypad.

The default value is 10001

Range = 1 - 32000

When using multiple TPI-PRO-DVIs within a NetLinx System, assign unique Device Number
values to each TPI-PRO/DVI.
FIG. 35 Setup page - Protected Setup button
Press to access the
Protected Setup page
(password-protected)
Clearing Password #5 from the initial Password Setup page, removes the need for
you to enter the default password before accessing the Protected Setup page.